Features & Benefits

FEATURES BENEFITS
Abrasion resistant rubber Prevents wear on pulley shell. Positive drive between pulley and belt
Low sulphur rubber Stable rubber hardness with age
Precision moulded strip Optimum rubber properties
Supplied in strip form 250mm wide Easy to install
Repeating diamond pattern Sheds water and dirt
Buffed CN bonding layer and buffed edges For optimum cold vulcanised adhesion to the pulley
Coloured diamond segments Blue for SBR and Red for FRAS
Fire resistant and anti-static (FRAS) rubber compound available Can be used in above or below ground applications
Strips packed in plastic film Preserves buffed bonding layer ready for application
Available with Hot Vulcanised bonding layer 100% rubber tear adhesion to pulley. No debonding, no shell corrosion at joints.
Elastotec Rubber Lagging is available in 10mm, 12mm and 15mm thicknesses

Rubber Specifications

Standard Premium FRAS
Polymer NR/SBR Blend NR SBR/CR Blend
Tensile strength (MPa) min 14.0 30 16.0
% Elongation min 400% 500% 500%
Hardness (shore A) 65+/-5 65+/-5 65+/-5
Specific gravity 1.13+/-0.03 1.13+/-0.03 1.43+/-0.3
Abrasion resistance max vol. loss (DIN 53516) 90mm3 90mm3 200mm3
FRAS – MDG 3608 N/A N/A PASS