


Elastotec is a company that  for the past ten years has specialised in conveyor pulley lagging. Our approach is different – we believe that pulley lagging is an engineered part of the pulley that if chosen correctly, engineered and manufactured correctly should last longer that the bearings and locking elements.
GLOBAL
Elastotec Pulley Lagging
Installations
- All Installations
- Copper
- Coal
- Iron Ore
- Other
in the now
Latest Elastotec news and
case studies
Pressure during hot vulcanising
This quarry located in the south-eastern region of New South Wales is a hard rock quarry that can produce up to 1.5 million tonnes per annum of quarry products.
Lagging Selection: Hot Vulcanised Vs Cold Bonded
Lagging Selection is key to obtaining the best possible lagging performance and a recent visit to a pulley refurbishment facility emphasised this with three pulleys on the floor â€
Lagging Selection – One of the 4 Pillars of Lagging Performance
Lagging can be of good quality and application can be correct, but lagging can still fail and does. Everything seems right but the lagging still doesn’t perform to expectations.
Elastotec Extreme Rubber Lagging
Elastotec extreme diamond rubber lagging is designed for drive and non drive pulleys that require extended service life.
Elastotec adhesion testing
At Elastotec, we engineer lagging solutions that keep conveyors running. Here are some causes of lagging failure.
Elastotec Direct Bond Ceramic Lagging
Elastotec Direct Bond Ceramic Lagging - application system designed to improve adhesion consistency, reduce lead times, reduce glue wastage and labour time.
Our goals
Providing pulley lagging solutions for
Coal, Iron Ore, Copper
In an industry where reliability is crucial, we manufacture pulley lagging and wear panel products that provide exceptional performance, ensuring that equipment is operational when required.

Coal mining
Find out how Elastotec has helped coal mines overcome a multitude of lagging problems such as lagging debonding from the pulley shell, ceramic tiles debonding and coming out of the lagging, and edge lifting of lagging.

Iron Ore mining
Moving millions of tonnes/annum of iron ore and operating 24/7 year round requires reliability of the conveyor system. Find out why using Elastotec Pulley Lagging is critical to achieving the maximum ore throughput.

Copper mining
Maintenance underground in confined spaces is clearly more difficult and time-consuming than maintenance of the same equipment on the surface. See how using Elastotec Pulley Lagging has provided a guarantee that the there would be no debonding of tiles from Hot Vulcanised Pulley Lagging.
PRODUCTS
Elastotec Ceramic, Rubber, Polyurethane
& Direct Bond Pulley Lagging products
Ceramic Pulley Lagging
High performance Elastotec ceramic tiles set within a 100% rubber tear bonding system. Available in a range of ceramic tile coverage and thicknesses. Suitable for both Hot Vulcanised and Cold Bonded application.
Rubber Pulley Lagging
Rubber lagging manufactured using an abrasion resistant top rubber layer and a buffed CN bonding layer to provide high levels of adhesion. Rubber lagging is for use in applications where there is a risk of fire and/or explosion such as underground coal mines, and grain and sugar handling facilities and is a safety critical item.
Polyurethane Pulley Lagging
Polyurethane lagging is used to increase service life of non drive pulleys. Polyurethane’s extreme abrasion resistance combined with its low coefficient of friction provide a solution to applications with premature wear when there’s a requirement for no risk of damage to the belt cover.
Direct Bond Pulley Lagging
Elastotec Direct Bond Ceramic Lagging is designed for use on drive and non-drive conveyor pulleys. This lagging provides a maintenance free wear resistant surface that will provide increased traction for drive pulleys and a smooth low friction surface for bend and tail pulleys.
Our Story
Company history, present
and the future
Our story
In an industry where reliability is crucial and the unplanned down time can result in millions of dollars lost over a single day, our focus is on manufacturing pulley lagging and wear panel products that provide the “Longest Service Life†possible, ensuring that equipment is operational when required.
contact us
Speak to an expert
from Elastotec
If you work in mining company operations/maintenance or are involved in the manufacture and refurbishment of conveyor pulleys, then we would like to share more about our ground-breaking work at Elastotec with you.