Description
Application
Magnepatch can be applied to any damaged equipment that has a flat steel surface that has been holed by abrasive wear and requires a patch to prevent spillage during operation.
Storage recommendations
- Stock usage based on first-in first-out method (FIFO)
- Storage conditions cool, dry and out of direct sunlight
- Avoid storage in proximity to equipment that generates ozone
- Do not store with chemicals such as fuels, lubricants and solvents
Shelf life
- In excess of 10 years when stored as per the recommendations above

Four high strength magnets
Recesses for small pry bar to
Moulded rubber handle
Key features and benefits
- Quick and easy to apply patch for chutes that have holes due to abrasive wear
- Four high strength magnets that provide >200kg of attachment force
- High quality abrasion resistant rubber compound
- Recessed lugs on each side allow removal of the Magnepatch with a small pry bar
- Red colour outer layer that makes the installed patch highly visible
- Moulded rubber handle for easy of handling, carrying, lifting etc.

Red outer colour

Sizes



Product demo
Rubber Specifications
Typical values
NAT | |
---|---|
Polymer | SBR |
Tensile strength (MPa) min ISO37 | 18.0 |
Tensile strength (MPa) min ISO37 | 550% |
Hardness (shore A) ISO868 | 65+/-5 |
Abrasion resistance max vol. loss ISO 4649 method A (non-rotating) | 70mm3 |
Heat ageing (Property change after 70°C 168hs) | Tensile strength 1% Elongation -15% Hardness 5 points |
Continuous operating temperature | -40/+80°C |
Magnepatch specifications
SIZE | CODE | WEIGHT/kg |
---|---|---|
165 x 165 x 38 mm | MPH-N-165-165-38-ELA-PP | 1.44 |
165 x 216 x 38 mm | MPH-N-165-216-38-ELA-PP | 1.88 |
165 x 357 x 38 mm | MPH-N-165-317-38-ELA-PP | 2.56 |