Tel: +(61)2 8987 1922

Mail: sales@elastotec.com.au

Magnefast Case Studies

Storage recommendations

How to store lagging:

  • Stock usage based on a first-in first-out method (FIFO).
  • The storage room for lagging must be cool, dry and dust-free.
  • Avoid storage places near sources of ozone generating equipment.
  • Do not store outside.
  • Avoid storage in direct sunlight and strong artificial light as UV light can damage the products and may lead to a premature ageing.
  • Under no circumstances should fuels, lubricants, acids, disinfectants, solvents or other chemicals be stored in the same storage area.
  • Keep the storage place clean. Protect the material from dust, water etc. with suitable coverings.
  • Allow 24 hours before use when lagging is removed from cold storage.

Shelf life

DIRECT BOND LAGGING AND WEAR PANELS
  • Stored <25°C
COLD BONDING LAGGING AND WEAR PANELS
  • Stored <25°C 3 years shelf life
  • Light buffing of bonding surfaces is recommended if over 4 months from production date
HOT VULCANISED LAGGING AND WEAR PANELS
  • <7°C and away from UV and ozone generating equipment 12 months
ADHESIVES AND PRIMERS
  • Store in flammable goods cabinet
  • Stored <25°C
  • Shelf life:
    • Primers 2 years
    • Cold bonding adhesive 2 years
    • Hot vulcanising adhesive 4 months
    • Direct bond adhesive 2 years

Products stored under the above conditions for longer periods of time than recommended need to be re-tested for adhesion before being used. If any doubts on storage recommendations, contact Elastotec.

CONTACT
 Save as PDF

Let’s talk

If you work in the mining industry, involved in conveyor maintenance, pulley manufacturing, conveyor design and conveyor maintenance, then, we would like to work with you to bring engineered pulley lagging solutions to the industry.

+ (61) 2 8987 1922
sales@elastotec.com.au